Screen Printing Exposure

TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In


TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In
TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In
TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In
TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In
TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In
TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In
TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In
TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In
TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In

TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In   TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In
TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil Ink-Jet Making Small Plate UV Light. This UV Exposure Unit adopts 20 pcs of LED lamp beads, the total power is 20W (equal to a 200W ordinary ultraviolet lamp), the wavelength is 365nm, the exposure lamp size is 5.54 inches; LED plate lamp service life can be up to 50,000 hours. The height of the lamp can be adjusted according to specific need. The distance bet the lamp and plate can range from 1.2" to 7.8". The lamp can rotate by 280°.

Adopts two-way clamps for convenient heights and angle adjustment to meet different exposing demands. This machine is mainly used for making screen plate in screen printing, pad printing, hot stamp printing, etc. A black rubber subplate (9.8"x9.8") is equipped for reducing the ultraviolet reflection during exposing, in order to get a better exposure effect. Equipped with a glass sucker for much more convenient, easier taking of glass.

The countdown timer will make sure you get the perfer exposing effect. The operation methods is as follows: Spread the black rubber on a flat table; Place the coating mesh frame on the rubber sheet, and stick the mesh side to the rubber sheet. Put the film on the top of the mesh exactly (in order to prevent the film sliding, it is best to use a little transparent tape to stick the film and the four sides of the mesh together);Use a glass sucker to lift the glass and place it on the film;(This machine is not configured with the glass for transportation safety, users can configure locally according to the frequently used size, 4-5 mm glass plate is appropriate). Move the machine to the top of the screen frame. The distance between the lower edge of the case and the screen frame is 3-5 cm.

According to the actual exposure time of photosensitive adhesive to set the countdown time. Turn on the power and start the countdown timer; After the countdown, The timer beeps and lights off, remove the machine, take out the glass and film, exposure is completed. Items included: 1 set of Screen Printing LED UV Exposure Unit (006806).

Any product you return must be in the same condition you received it and in the original packaging. We usually respond within 24 hours on weekdays.

Thank you for shopping at our store. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing".

The seller is "idavra1" and is located in this country: US. This item can be shipped to United States.

  1. Brand: TECHTONGDA
  2. UPC: 748497559389
  3. ISBN: 0748497559389


TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In   TECHTONGDA LED UV Exposure Unit Equipment for Silk Screen Printing Stencil In