Adopt countdown timer to set the exposing time, the timer will automatically save and memory your set data. Different brands of photosensitive adhesive need different exposure time, the operator needs to use the photosensitive adhesive before the machine exposure experiment to determine the best exposure time. Effective Exposuring Area: 11.8"15.7"/3040cm. This machine built-in four LED special UV print lamp tube, each power 12W, normal use of more than 50,000 hours. Effective printing area of 3040cm.
Adopt the simple and convenient countdown timer to set the printing time. When the exposure time reaches, the machine shuts off the lamp tube automatically. Timer with automatic memory function, set once, no matter the switch host times, timing is permanently saved.
Methods of Using The Timer. Before using, please press the "C" button to reset, the display shows 00:00 00 and it is flashing state. Pressing the "hour" and "minute" and "second" button separately to set the countdown of the electrify time, the display shows "ON".
Pressing the "start/pause" button to start the countdown. At first press the "C" button to remove the original set ; Then press "minute" set to"5"; press "seconds" set to "30"; Then press the "start/pause" to start the countdown, lamp open; After five minute 30 seconds countdown, plate burning machine tube closed.
This setting do not need to change, it is automatically saved. When the machine starts again, the countdown is still 5 minutes and 30 seconds.Pls set up before you use the exposure unit. 1 set of SPE-S3040 110V Movable LED Exposure Unit(006870). You can make order with no worries. Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition.
Orders are processed from Monday-Friday; Not on the weekends & public holidays. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing".
The seller is "techtongda365" and is located in this country: US. This item can be shipped to United States.