INTBUYING UV Exposure Unit for Silk Screen Printing Light Box 18x12 Inches 110V. Quality assured:Factory made & Quality guaranteed. Wide Use: This small exposure unit mainly used for exposure small screens, printing plate, hot stamping ;exposing area is 4632cm. Humanized Construction:There are four 15W light tubes;the exposing area is 4632cm;Adopt countdown timer to set the exposing time;the timer will automatically save and memory your set data. Equipped with 8mm Tempered glass plate, resistant to friction;the glass is broken, the glass shards are no sharp, to ensure the safety of operator.
Intelligent timer:The timer can set the exposing time, after reach the exposing time, the machine automatically turns off the tubes. The timer have automatic memory function, set in once, whether the number of switch turn on or off, time will save. Sponge and Shading cloth Included:Equipped with 7.8711.812.36inch sponge, used for press the film more closely, place a flat weight, improve the quantity of exposing.
Equipped with shading cloth, cover the top of whole machine, block the UV damage to the operator. 18"x12"UV Exposure Unit Features 1. The timer can set the exposing time, after reach the exposing time, the machine automatically turns off the tubes The timer have automatic memory function, set in once, whether the number of switch turn on or off, time will save 2. To ensure the transportation safety of tubes, all tubes are individually packaged in box, when install, remove the glass by sucker, insert the plugs on the two sides of tubes one by one, place the glass and use it Special note: Different brand of emulsion have different exposing time, the operator need to use the emulsion in this machine and confirm the best exposing time.Methods of using the timer 1. Before using, please press the "C" button to reset, the display shows 00:00 00 and it is flashing state. Press the "hour" and "minute" and "second" button separately to set the countdown of the electrify time, the display shows "ON" 3. Press the "start/pause" button to start the countdown. At first press the "C" button to remove the original set ; Then press "minute" set to"5"; press "seconds" set to "30"; Then press the "start/pause" to start the countdown, lamp open; After five minute 30 seconds countdown, plate burning machine tube closed.
This setting do not need to change, it is automatically saved. When the machine starts again, the countdown is still 5 minutes and 30 seconds. Basic parameters of the timer: Countdown: 1 SEC - 99 hours 59 minutes and 59 seconds Working temperature: - 25 c - 65 c Specification: Exposure size: 18x12 inch(4632cm) Color:Blue Voltage: 110V Power: 60W Machine using material:steel plate Machine surface treatment:Electrostatic spraying Item Included : 1set of 110V Exposure Unit(010038). Any product you return must be in the same condition you received it and in the original packaging. We usually respond within 24 hours on weekdays.
Thank you for shopping at our store. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing".The seller is "yaham3899" and is located in this country: US. This item can be shipped to United States.