Exposure Unit 1822inch Exposuring Area Vacuum LED Exposure Unit with Lid 219109

  

110V Exposure Unit 1822inch Exposuring Area Vacuum LED Exposure Unit for Screen Printing&Pad Printing etc. This vacuum UV exposure unit mainly used for exposure precise screens; the external pump is connected with main engine; it will make the screens and transparency film close on the glass tightly by evacuating the air of the vacuum charmer; exposure quality is high, especially for precise screens.

The machine adopts timer to set the exposing time; the timer have automatic memory function, set in once, whether the number of switch turn on or off, time will save. Different brand of emulsion have different exposing time, the operator need to use the emulsion in this machine and confirm the best exposing time.

Pump needs to add engine oil before used only, lest cause motor damage. No oil can not be used Periodic inspection is required. Stainless steel or zinc plating, nickel plating. Screen printing, pad printing etc. Thickened Frame: The fuselage is made of thickened metal, which is sturdy and durable.

And the surface is electrostatically sprayed, which strengthens the anti-fall and anti-collision ability of the machine. Without intentional violent damage, the outside of the machine can effectively protect the internal lamps and prolong the service life of the machine. Protective Buckle: The machine is equipped with a protective buckle, which connects the top protective cover with the bottom of the machine during transportation to ensure the stability of the machine and effectively prevent the lamp from breaking. At the same time, the clamping effect of the protective buckle makes the machine function better.

The machine is more stable. The machine is equipped with a timer, which can set the required action time and effectively control the action time to meet the exposure requirements of different materials. It is more practical, operates more safely and efficiently, and improves work efficiency. Intelligent operation to meet the practical needs of different places and users.

LED Tubes: The inside of the machine is equipped with LED light tubes, which can make the material put in better exposure and better effect. Protective Cover: The top of the machine is equipped with a protective cover, which can better protect the lamp and ensure the work of the lamp. At the same time, the protective cover is equipped with a handle for easy opening.

Simple Maintenance: Due to bumpy transportation, the lamp may not light up due to poor contact. If it appears after receiving the goods, please operate as shown in the picture. Using Steps of The Machine.

Connect the vacuum pump pipe with the exhaust pipe. Plug the vacuum pump power into the socket.

Turn on the machine, adjust the Settings of exposure time. Put the film and plate on the glass and adjust the position.

Put the four sledge foots on the four corners of the screen frame. Close the cover, fit the hook locked; Vacuum pump starts exposing at the same time. After 5 minutes of exposing, the rubber cloth is closely fit with the mesh in the screen frame. Press the timer "start/pause" button to expose. When the exposing time is over, the tubes will be off automatically ;open the exhaust valve, the exposure will be disappear. Turn off the power of the machine, and take out the screen frame. Methods of Using The Timer. Before using, please press the "C" button to reset, the display shows 00:00 00 and it is flashing state. Press the "hour" and "minute" and "second" button separately to set the countdown of the electrify time, the display shows "ON". Press the "start/pause" button to start the countdown. For example: set exposure time 5 minutes 30 seconds : At first press the "C" button to remove the original set ; Then press "minute" set to"5"; press "seconds" set to "30"; Then press the "start/pause" to start the countdown, l amp open; After five minute 30 seconds countdown , plate burning machine tube closed. This setting do not need to change, it is automatically saved. When the machine starts again, the countdown is still 5 minutes and 30 seconds. Basic parameters of the timer: Countdown: 1 SEC - 99 hours 59 minutes and 59 seconds Working temperature: - 25 c - 65 c. 1 Set of 1822inch Exposure Unit for Screen Printing&Pad Printing etc. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Please contact with us at first for more details. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP.

Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item.