Screen Printing Exposure

24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine


24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine
24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine
24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine
24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine
24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine
24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine
24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine
24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine
24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine
24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine
24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine
24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine

24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine    24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine

US Stock, 6 Color 6 Station. Silk Screen Printing Press Machine.

With Micro Registration Limited Offer, Be quickly. Platen size: 17.7" x 21.6"(55 x 45cm). Max frame size: 20" x 24" (50 x 60 cm). Max image size: 15.7"x 20"(40 x 50 cm).

The Manual of the Screen Printing Machine in PDF. The machine is 6 color 6 station screen printing machine. Suitable for one or two people to use. Users just need to stand in one platen station to work, platen station and. Frame can rotate in 360 degree. To station location, it don't need the operator move to work. Mainly used for T-shirt printing, also printed cloth and other products. Optional flash dryer, and the dryer place in the upside of printing station's platen, drying the surface of material after printing for 3-5 seconds, then printing the next color, improve the work efficiency, two people operate(one people printing, one people place the T-shirt and drying platen, Fold the printed T-shirts)Printed. Four-color T shirt 200-250 pieces per hour. Both shirtboard layer and screen layer can rotate independently. Smart micro registration device for printing multicolor precisely.

Screens can be adjusted front, back, lefe right through micro microregistration. Aluminium screen clamps can be adjusted up and down horizontally, beautiful and pratical. All heads can be pressed down at same time, can print multicolor on multiple stations. Special design of spring device adjust tension for screen up and down. Double fix position device is an initiate design, makes color registration accurate.

Detachable bracket facilitates interchange shirtboards. Bigger and thicker steel round plate, more stable when printing.

Add the triangle support under pallet plate, 35mm diameter bigger axis. Heavy gauge all steel construction, electroplating coating, durable, no rust. Stands can be adjusted up and down, and be detachable for packing. Equipped with a full set of installation and maintenance tools and spare parts. Composite structure for packing and transportation.

110V 240W Calca Vacuum Exposure Unit 24" x 28" Precise Screen Printing Compressor Outside. This calca vacuum UV exposure unit mainly used for exposure precise screens; the external pump is connected with main engine; it will make the screens and transparency film close on the glass tightly by evacuating the air of the vacuum charmer; exposure quality is high, especially for precise screens. There are twelve 20W light tubes. The exposing area is 2426in. The machine adopts timer to set the exposing time; the timer have automatic memory function, set in once, whether the number of switch turn on or off, time will be saved. SPE-ZKSBJ 6070 Vacuum UV Exposure Unit. American standard, National standard, European standard. Stainless steel or zinc plating, nickel plating. 31.5 x 28.3 x 9.4inch. 36x29x12.4inch (92 x 74 x 31cm). The functions and features of this machine. There are twelve 20W light tubes(power of light tubes 240W; spare part: one tube and a Ballast), it can normally be used for about 10, 000 hours.

The exposing area is 6067cm, and it is suitable for exposing different size screen frames within outsize 5865cm. The rubber cloth and seal ring adopts Taiwan produces high quality materials; Good stretch elasticity, sealed well. External 400W high speed vacuum pump; Vibration is small; noise is small; vacuum degree is 5Pa; it can work for 24 hours. Equipped with 8mm Tempered glass plate, resistant to friction; the glass is broken, the glass shards are no sharp, to ensure the safety of operator. The timer can set the exposing time, after reach the exposing time, the machine automatically turns off the tubes.

The timer have automatic memory function, set in once, whether the number of switch turn on or off, time will save. Set the release valve, after the exposure and open the release valve, remove the vacuum, open the cover and remove the screen. This machine is equipped with four soft plastic pad feet, place on the corner of frame, during the vacuum, prevent the corner of frame damage the rubber cloth. Different brand of emulsion have different exposing time, the operator need to use the emulsion in this machine and confirm the best exposing time.

Methods of using the timer. Before using, please press the "C" button to reset, the display shows 00:00 00 and it is flashing state. Press the "hour" and "minute" and "second" button separately to set the countdown of the electrify time, the display shows "ON". Press the "start/pause" button to start the countdown.

For example: set exposure time 5 minutes 30 seconds. At first press the "C" button to remove the original set;Then press "minute" set to"5"; press "seconds" set to "30"; Then press the "start/pause" to start the countdown, lamp open; After five minute 30 seconds countdown, plate burning machine tube closed. This setting do not need to change, it is automatically saved. When the machine starts again, the countdown is still 5 minutes and 30 seconds. Basic parameters of the timer.

Countdown: 1 SEC - 99 hours 59 minutes and 59 seconds. Working temperature: - 25°C- 65°C.

Using steps of the machine. Pump to add engine oil before used only. No oil can not be used. Connect the vacuum pump pipe with the exhaust pipe. Plug the vacuum pump power into the socket.

Turn on the machine, adjust the Settings of exposure time. Put the film and plate on the glass and adjust the position. Put the four sledge foots on the four corners of the screen frame.

Close the cover, fit the hook locked; Vacuum pump starts exposing at the same time. After 5 minutes of exposing, the rubber cloth is closely fit with the mesh in the screen frame. Press the timer "start/pause" button to expose. When the exposing time is over, the tubes will be off automatically;open the exhaust valve, the exposure will be disappear. Turn off the power of the machine, and take out the screen frame. Screen Printing Solution: Factory: Package. Gross weight: 330 lb(150 kg).

Packing size: in 2 wooden case. 40 x 38.6 x 11.8 inch(101 x 98 x 30 cm). 22 x 22 x 15.7 inch(56 x 56 x 40 cm). This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing". The seller is "he-parts2017" and is located in this country: US.

  1. Model: 6 color 6 staion
  2. Country/Region of Manufacture: China
  3. Number of Press Stations: 6 Station
  4. Material: Aluminum
  5. Type: Press/Print Station
  6. MPN: 6564002809200
  7. Automation Type: Manual
  8. Brand: CALCA
  9. Number of Color Stations: 6 Color
  10. Item Code:: SPM-TJ-SPE6070ZK-US
  11. ID: 29021
  12. Belt Size: 24 in
  13. Exposure Unit Parts/Accessoies Type: Screen Registration System
  14. UPC: 8414830888943

24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine    24 x 26 Exposure Unit + Micro Registration 6-6 Station Screen Printing Machine