110V UV Exposure Unit Equipment for Silk Screen Printing 20X20In Exposure Area S

  

110V UV Exposure Unit Equipment for Silk Screen Printing 20X20In Exposure Area Simple Type Stencil Ink-Jet Making Plate Light. The exposure unit is exposed of two 26W UV tubes, which can be swivel adjusted while exposing. The holders can be easily installed because of the two-way clamps; besides, it can be adjusted in different heights and angles to satisfy different exposing demands.

Makes it easier for exposing time controlling. Can the two exposure unit working simultaneously. Plate can effectively reduce the ultraviolet reflection during exposure and ensure better exposure effect. Can a closer contact between the transparency film and the screen plate; besides, because of the?????????? Glass taking is safer and much more convenient.

Input Voltage:110V;Exposure Area: 20"x20" (50x50cm); Glass Size: 13.7"x17.7"x0.3" (35x45x0.8cm); Rubber Subplate Size: 20"x24 (50x60cm); Light Tubes Power: 26W/pc; Total Powder: 52W; Wavelength:365nm. Screen printing screens are coated with a light sensitive emulsion using a scoop coater. When the emulsion is dry, place a positive print of your image on the screen. Once you burn the screen, the emulsion that did not get any UV will wash out of the screen exposing the tiny pin holes. The surrounding areas that were exposed to UV will be cured.

Hence the ink will pass through screen onto your substrate. This simple UV Exposure Unit Kit is especially designed for personal usage in screen printing; it is easy operated and with very low cost, which will also be the best choice for new hand to start screen printing business. Equipped with package list and operation video; besides, we can also supply other technical supports.

The exposure unit is exposed of two 26W tubes, which can be swivel adjusted while exposing. The equipped glass can ensure a closer contact between the transparency film and the screen plate; besides, because of the glass sucker, glass taking is safer and much more convenient. The equipped black rubber subplate can reduce the ultraviolet reflection during exposing, which can get a better exposure effect. Because of the the glass sucker, glass taking is safer and much more convenient. The equipped universal switch plug can ensure the two exposure unit working simultaneously. The equipped countdown timer makes it easier for exposing time controlling. This Simple UV Exposure unit consists of below Accessories. 2 pcs of 26w UV coiled tubes. 2 sets of distance adjusted tube holder. 1 pc of glass plate 37 x 47 x 0.8cm (14.57 x 18.5 x 0.31inch). 1 pc of glass sucker. 1 pc of black rubber board 60 x 50 x 0.3cm (20 x 24 x 0.12inch). 1 pc of countdown timer. 1 pc of universal one turn three switch & power supply changeover socket.

Exposure Area: 20"x24" (50x60cm). Glass Size: 14.6"x18.5"x0.3 (37x47x0.8cm).

Rubber Subplate Size: 20"x24" (50x60cm). Net Weight: 22Lb (9.7kg). Package Size: 21"x17"x12.6 (53x43x32cm).

21.65 x 16.93 x 12.6 inches. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Your feedback very important to us, after you get your package and you are. If you have any problem with your order / any questions please before leave any type of feedback.

Thank you for shopping at our store.